These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
Five Pin Connector
Function
2-Position Spring Offset, End to Center
Valve Type
High-Performance
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Response Type
Standard Response
EN Code
None
Electrical Options
None
Indicator Lights
Yes
Port Restrictor Plugs
None
Port T Code
6
Rated Flow [Max]
21 gal/min
Pilot/Drain
None
Reducer Module
N/A
Electrical Connector Code
PA5
Crossover
All Ports Open
Solenoid Code
B
Function Code
0
Solenoid Indicator Lights Code
L
Coil Type Code
F
Surge Suppressor/Damper
None
Solenoid
Single
Manual Override Option Code
None
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
BL
NFPA Size
D03
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
AC/DC
AC
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid Energization Code
None
Pressure [Max]
5075 psi
Overrides
No Overrides
Spool Shift Timing
N/A
Center Position
All Ports Open
Seal Material
Buna-N
Design No.
60
Spool Code
0
Coil Rating Code
B
Cycle Rate [Max]
N/A
Housing Code
W
Operation
Solenoid Operated
Mechanical Options
None
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back