Find a Service Center
- D05 Double Solenoid Operated Valve
- 48 VDC
- Lead Wires w/o Terminal Box
- Flying Leads
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Rated Flow [Max] | 25 gal/min |
| Coil Type Code | None |
| Spool Spring Arrangement Code | C |
| NFPA Size | D05 |
| Reducer Module | N/A |
| Actuator Type | Solenoid |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Pilot Valve Type | N/A |
| Pressure [Max] | 3600 psi |
| Overrides | No Overrides |
| Response Type | Standard Response |
| Electrical Options Code | None |
| Indicator Lights | No |
| Electrical Options | None |
| Mechanical Options | None |
| Solenoid | Double |
| Pilot/Drain | None |
| Crossover | P Blocked, A or B to T |
| Pressure Port Check Valve Pressure | N/A |
| Seal Material | Buna-N |
| Coil Rating Code | J |
| Center Position | P Blocked, A & B to T |
| Function | 3-Position Spring Centered |
| Port Restrictor Plugs | None |
| Operation | Solenoid Operated |
| Valve Type | Standard-Duty |
| Cycle Rate [Max] | N/A |
| Design No. | 60 |
| Coil Type | Flying Leads |
| Port T Pressure Rating | 1000 psi |
| Surge Suppressor/Damper | None |
| Mechanical Options Code | None |
| AC/DC | DC |
| Flow Direction Code | 4 |
| Voltage & Frequency | 48 VDC |
| Spool Code | 6 |
| Weight | 10.0 LB |
