02-144268

Vickers D05 Solenoid Valve

Item #102084768

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Cycle Rate [Max]	N/A
Electrical Connection	KU W/ Deutsch Connector
Model No.	DG4S4L-016C-D-60
Reducer Module	N/A
Pressure Port Check Valve Pressure	N/A
Overrides	No Overrides
Mechanical Options	None
Function	3-Position Spring Centered, Double End
Design No.	60
Actuator Type	Solenoid
Pressure [Max]	3600 psi
Response Type	Standard Response
Flow Direction Code	4
Tank Port Rating	1000
Operation	Solenoid Operated
NFPA Size	D05
Valve Type	Standard-Duty
Crossover	P Blocked, A or B to T
Electrical Options	None
Spool Spring Arrangement Code	C
Center Position	P Blocked, A & B to T
Port T Pressure Rating	1000 psi
Surge Suppressor/Damper	None
Port Restrictor Plugs	None
AC/DC	AC
Coil Rating Code	D
Pilot Valve Type	N/A
Electrical Options Code	L
Pilot/Drain	None
Voltage & Frequency	220 VAC - 50 Hz
Indicator Lights	Yes
Coil Type Code	None
Coil Type	Flying Leads
Mechanical Options Code	None
Rated Flow [Max]	25 gal/min
Spool Code	6
Solenoid	Double
Seal Material	Buna-N
Weight	10.0 LB