Find a Service Center
- D05 Double Solenoid Operated Valve
- 24 VDC
- Lead Wires
- Connector Fitted
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Spool Spring Arrangement Code | C |
| Mechanical Options Code | None |
| Flow Direction Code | 4 |
| Coil Type | Connector Fitted |
| Pilot/Drain | None |
| Pressure Port Check Valve Pressure | N/A |
| Pressure [Max] | 3600 psi |
| Function | 3-Position Spring Centered |
| AC/DC | DC |
| Mechanical Options | None |
| Response Type | Standard Response |
| Electrical Options | None |
| Coil Rating Code | H |
| Pilot Valve Type | N/A |
| NFPA Size | D05 |
| Port Restrictor Plugs | None |
| Valve Type | Standard-Duty |
| Actuator Type | Solenoid |
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| Operation | Solenoid Operated |
| Seal Material | Buna-N |
| Solenoid | Double |
| Reducer Module | N/A |
| Coil Type Code | U1 |
| Center Position | P Blocked, A & B to T |
| Electrical Options Code | None |
| Rated Flow [Max] | 25 gal/min |
| Port T Pressure Rating | 1000 psi |
| Crossover | P Blocked, A or B to T |
| Design No. | 60 |
| Overrides | No Overrides |
| Voltage & Frequency | 24 VDC |
| Cycle Rate [Max] | N/A |
| Spool Code | 6 |
| Electrical Connection | Lead Wires |
| Weight | 10.0 LB |
