Find a Service Center
- Solenoid Valve
- 4-Way, 2-Position Valve Type
- Direct Acting Actuation
- Spool
description
- Four-way, two-position, direct-acting, spool-type, screw-in cartridge solenoid valve. In the de-energized position, flow is allowed between port 1 and port 4 while port 2 and port 3 are blocked. In the energized position port 3 is open to port 4 and port 2 is open to port 1.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Manual Override | No Manual Override |
| Temperature Range [Min] | -40 °F |
| Valve Voltage Rating | 12 VDC |
| Size Designation | 10 |
| Cavity | C-10-4 |
| Temperature Range [Max] | 248 °F |
| Valve Type | 4-Way, 2-Position |
| Pressure [Max] | 3000 psi |
| Watt Rating | 23 W |
| Seal Kit Viton | 566080 |
| Connector Type | Spade |
| Filter Option | None |
| Actuation | Direct Acting |
| Poppet/Spool | Spool |
| Seal Kit Buna | 889625 |
| Model No. | SV4-10-4-0-12DQ |
| Seal Material | Buna-N |
| Series | J Series |
| Cartridge Valve Series | SV4-10-4 |
| Flow [Max] | 6 gal/min |
| Housing No. | N/A |
| Bi-Directional (2-Way Valves) | No |
| Coil Series | Use J Series, 23 W |
| Housing Material | Aluminum |
| Operation | Solenoid Operated |
| Weight | 0.0 LB |
