Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV3-10 Series
- SAE-6 Port Size
- SAE Port Type
caution
- Maintain 5 to 8 Nm (4 to 6 ft lb) maximum torque on valve tube nut
- over-tightening may cause failure
- Aluminum housings can be used for pressures up to 210 bar (3,000 psi)
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Body Type | 10 |
| Pressure Setting | 1044 psi |
| Seal Kit Buna | 565803 |
| Pilot Ratio | 100:1 |
| Cracking Pressure [Min] | 300 psi |
| Port Size | SAE-6 |
| Series | RV3-10 |
| Model No. | RV3-10-F-6T-18/10 |
| Seal Material | Buna-N |
| Cage Seals | Single Backup Ring |
| Style | Poppet |
| Adjustment Type | Factory Set |
| Type | Pressure Relief Valve |
| Flow [Max] | 20 gal/min |
| Housing Material | Aluminum |
| Pressure [Max] | 3626 psi |
| Cavity | C-10-2 |
| Temperature Range [Min] | -40 °F |
| Operation | Direct Acting |
| Valve Material | Steel |
| Recommend Filtration Level | 18/16/13 microns |
| Operating Pressure [Min] | 290 psi |
| Leakage | 0.25 cc/min |
| No. of Housing Ports | 2 |
| Temperature Range [Max] | 248 °F |
| No. of Valve Ports | 2 |
| Manufacturer Part No. | RV3-10-F-6T-18/10 |
| Cracking Pressure [Max] | 1800 psi |
| Seal Kit Viton | 566086 |
| Operating Pressure [Max] | 3626 psi |
| Port Type | SAE |
| Installation | Screw-in Cartridge |
| Weight | 0.48 LB |
