These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
P to T, A & B Blocked
Spool Code
8
Electrical Options
None
Coil Rating Code
D
Seal Material
Buna-N
Design No.
61
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Solenoid Energization Code
V
Pressure Port Check Valve Pressure
N/A
Solenoid
Double
Valve Type
High-Performance
Operation
Solenoid Operated
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
Reducer Module
N/A
Function Code
8
Coil Type Code
F
Pressure [Max]
5075 psi
EN Code
None
Surge Suppressor/Damper
None
Solenoid Code
D
Spool Indicator Switch Code
None
NFPA Size
D03
Crossover
All Ports Open, Restricted
Spool Shift Timing
N/A
Voltage & Frequency
220/240 VAC – 50/60 Hz
Mechanical Options
None
AC/DC
AC
Housing Code
W
Pilot/Drain
None
Response Type
Standard Response
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port Restrictor Plugs
None
Overrides
No Overrides
Function
3-Position Spring Centered
Indicator Lights
No
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Actuator Type
Solenoid
Electrical Connection
No Connector
Port T Code
6
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back