Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| Manual Override | Plain Override |
| Leakage | Standard Performance |
| AC/DC | DC |
| Pressure Port Check Valve Pressure | N/A |
| Mechanical Options Code | None |
| Mechanical Options | None |
| Crossover | All Ports Blocked, or P & B Blocked, A to T |
| Coil Rating Code | X |
| Coil Type | Flying Leads |
| Coil Type Code | None |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Voltage & Frequency | 250 VDC |
| Surge Suppressor/Damper | None |
| Electrical Options | None |
| Function | 3-Position Spring Centered |
| Port T Pressure Rating | 1000 psi |
| Model No. | DG4S4W-013C-X-60 |
| Indicator Lights | Yes |
| Flow Direction Code | 4 |
| Actuator Type | Solenoid |
| Performance | Standard Performance |
| NFPA Size | D05 |
| Mounting | Subplate/Manifold Mount |
| Overrides | No Overrides |
| Solenoid | Double |
| Reducer Module | N/A |
| Spool Spring Arrangement Code | C |
| Seal Material | Buna-N |
| Rated Flow [Max] | 24 gal/min |
| Pilot/Drain | None |
| Center Position | P & B Blocked, A to T |
| Temperature Range [Max] | 122 °F |
| Temperature Range [Min] | 68 °F |
| Valve Type | Standard-Duty |
| Cycle Rate [Max] | N/A |
| Body Material | Gray Iron |
| Compatible Fluids | Petroleum Oil |
| Design No. | 60 |
| Pressure [Max] | 8500 psi |
| Operation | Solenoid Operated |
| Actuation Identification | Solenoid A, Solenoid B |
| Port Restrictor Plugs | None |
| Tank Port Rating | 1000 |
| Spool Code | 3 |
| Electrical Options Code | W |
| Pilot Valve Type | N/A |
| Fluid Cleanliness | 19/17/14 micron |
| No. of Stages | Single Stage |
| Weight | 10.0 LB |
