These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
Overrides
No Overrides
Electrical Connector Code
None
Coil Type
Dual 6.3 mm Spade
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Reducer Module
N/A
Mechanical Options
None
Crossover
All Ports Open, Restricted
NFPA Size
D03
Design No.
61
Manual Override Option Code
H
Spool Indicator Switch Code
None
Solenoid
Double
Port Restrictor Plugs
None
AC/DC
DC
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Coil Type Code
SP2
Electrical Options
None
EN Code
None
Spool Code
8
Housing Code
None
Solenoid Code
G
Operation
Solenoid Operated
Electrical Connection
No Connector
Pilot/Drain
None
Indicator Lights
No
Surge Suppressor/Damper
None
Voltage & Frequency
12 VDC
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Function Code
8
Spool Spring Arrangement Code
C
Function
3-Position Spring Centered
Response Type
Standard Response
Solenoid Energization Code
V
Port T Pressure Rating
3000 psi
Port Restrictor Plug Code
None
Pilot Valve Type
N/A
Port T Code
7
Coil Rating Code
G
Rated Flow [Max]
21 gal/min
Pressure [Max]
5075 psi
Center Position
P to T, A & B Blocked
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
