02-324777

Vickers D05 Solenoid Valve

Item #101978019

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Function	2-Position Spring Centered
Seal Material	Buna-N
AC/DC	AC
Coil Type Code	None
Mechanical Options	Single Solenoid Reverse Assembly
Design No.	60
Pilot Valve Type	N/A
Flow Direction Code	4
Solenoid	Single
Voltage & Frequency	110/120 VAC - 50/60 Hz
Tank Port Rating	1000
Actuator Type	Solenoid
Response Type	Standard Response
Spool Spring Arrangement Code	B
Rated Flow [Max]	25 gal/min
Port T Pressure Rating	1000 psi
Center Position	P Blocked, A & B to T
Mechanical Options Code	LH
Electrical Options Code	LW
Coil Rating Code	B
Electrical Options	None
Spool Code	6
Reducer Module	N/A
Pressure [Max]	3600 psi
Cycle Rate [Max]	N/A
Surge Suppressor/Damper	None
Port Restrictor Plugs	None
Crossover	P Blocked, A or B to T
Indicator Lights	Yes
Pressure Port Check Valve Pressure	N/A
Valve Type	Standard-Duty
Pilot/Drain	None
Operation	Solenoid Operated
Electrical Connection	Lead Wires w/ Terminal Box
Model No.	DG4S4LW-016B-B-60-LH
Coil Type	Flying Leads
NFPA Size	D05
Overrides	No Overrides
Weight	10.0 LB