Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Surge Suppressor/Damper Code | None |
| Actuator Type | Solenoid |
| Seal Material | Buna-N |
| Response Type | Standard Response |
| EN Code | None |
| Electrical Connector Code | None |
| Pressure [Max] | 5000 psi |
| Electrical Options Code | None |
| Coil Rating Code | D |
| Body Material | Ductile Iron |
| Pilot Drain Code | None |
| Leakage | Standard Performance |
| Housing Code | None |
| Mechanical Options | None |
| Crossover | All Ports Open, Restricted |
| Solenoid | Double |
| Pilot Pressure Code | None |
| Manual Override | Plain Override |
| Actuation Identification | Solenoid A, Solenoid B |
| No. of Stages | Two Stage |
| Reducer Module Code | None |
| Indicator Lights | No |
| Temperature Range [Max] | 230 °F |
| Coil Type Code | U |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Manual Override Option Code | None |
| Compatible Fluids | Petroleum Oil |
| Temperature Range [Min] | -40 °F |
| Tank Port Rating | 5000 |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Solenoid Indicator Lights Code | None |
| Gauge Ports Code | None |
| Electrical Options | None |
| Design No. | 10 |
| Spool Code | 8 |
| Port Restrictor Plug Code | None |
| Valve Type | Standard-Duty |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Port Restrictor Plugs | None |
| Pressure Port Check Valve Pressure | N/A |
| Solenoid Energization Code | V |
| Mounting | Subplate/Manifold Mount |
| Center Position | P to T, A & B Blocked |
| Rated Flow [Max] | 175 gal/min |
| Model No. | DG5V-8-S-8C-VM-U-D-10 |
| Spool Spring Arrangement Code | C |
| Response Type Code | None |
| Reducer Module | No |
| Pilot/Drain | Internal Pilot/External Drain |
| Pressure Port Check Valve Code | None |
| Spool Indicator Switch Code | None |
| Mechanical Options Code | None |
| Fluid Cleanliness | 19/17/14 micron |
| Gauge Port | SAE-4 |
| Pilot Valve Type Code | S |
| Pilot Valve Type | CETOP 3, Standard Performance |
| Spool Control Modification Code | None |
| Electrical Connection | No Connector |
| Overrides | Plain Override Solenoid Ends |
| Port T Pressure Rating | 5000 psi |
| NFPA Size | D08 |
| Function | 3-Position Spring Centered |
| Operation | Pilot Operated |
| Surge Suppressor/Damper | None |
| AC/DC | AC |
| Performance | Standard Performance |
| Weight | 35.0 LB |
