These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plugs
None
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Response Type
Standard Response
Manual Override Option Code
None
Function Code
6
AC/DC
DC
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
C
Center Position
P Blocked, A & B to T
Electrical Options
None
Coil Type Code
KU
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
None
Solenoid Energization Code
None
Solenoid Code
G
Coil Rating Code
G
Housing Code
None
Mechanical Options
None
Crossover
P Blocked, A or B to T
Actuator Type
Solenoid
Operation
Solenoid Operated
Electrical Connector Code
None
Valve Type
High-Performance
Function
3-Position Spring Centered
Design No.
60
Pilot Valve Type
N/A
Reducer Module
N/A
Spool Code
6
Solenoid
Double
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
NFPA Size
D03
Port T Pressure Rating
3000 psi
Voltage & Frequency
12 VDC
Electrical Connection
No Connector
EN Code
None
Cycle Rate [Max]
N/A
Overrides
No Overrides
Coil Type
Top Exit Flying Leads
Indicator Lights
No
Pressure [Max]
5075 psi
Port T Code
7
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
