These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper Code
None
Center Position
All Ports Open
Spool Spring Arrangement Code
C
Port T Pressure Rating
3000 psi
Coil Type Code
KU
Actuator Type
Solenoid
Spool Code
0
Surge Suppressor/Damper
None
Function Code
0
Seal Material
Buna-N
Spool Shift Timing
N/A
Overrides
No Overrides
Solenoid
Double
Coil Type
Top Exit Flying Leads
Manual Override Option Code
None
Spool Indicator Switch Code
None
Solenoid Energization Code
None
Coil Rating Code
G
AC/DC
DC
Electrical Connector Code
None
Reducer Module
N/A
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Function
3-Position Spring Centered
NFPA Size
D03
Valve Type
High-Performance
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Mechanical Options
None
EN Code
None
Indicator Lights
No
Voltage & Frequency
12 VDC
Pressure [Max]
5075 psi
Solenoid Code
G
Electrical Options
None
Design No.
60
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Crossover
All Ports Open
Port T Code
7
Response Type
Standard Response
Housing Code
None
Pilot/Drain
None
Electrical Connection
No Connector
Cycle Rate [Max]
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
