These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Housing Code
W
Spool Spring Arrangement Code
C
Pilot/Drain
None
Function Code
0
Seal Material
Buna-N
Solenoid Code
GL
Cycle Rate [Max]
N/A
Pressure [Max]
5075 psi
Function
3-Position Spring Centered
Spool Indicator Switch Code
None
Spool Shift Timing
N/A
Reducer Module
N/A
Center Position
All Ports Open
Pressure Port Check Valve Pressure
N/A
NFPA Size
D03
Solenoid Energization Code
None
AC/DC
DC
Voltage & Frequency
12 VDC, Low Power Coil
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
L
Valve Type
High-Performance
Surge Suppressor/Damper
None
Spool Code
0
Coil Rating Code
GL
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Manual Override Option Code
None
Electrical Options
None
Port Restrictor Plug Code
None
EN Code
None
Design No.
60
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Port T Code
7
Electrical Connection
Wired Terminal Block
Response Type
Standard Response
Solenoid
Double
Indicator Lights
Yes
Crossover
All Ports Open
Electrical Connector Code
T
Operation
Solenoid Operated
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
