These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plug Code
None
Cycle Rate [Max]
N/A
Indicator Lights
Yes
Voltage & Frequency
12 VDC, Low Power Coil
Solenoid Indicator Lights Code
L
Port T Code
7
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Solenoid
Double
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Crossover
All Ports Blocked
Electrical Options
None
Design No.
60
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure [Max]
5075 psi
Coil Rating Code
GL
Solenoid Code
GL
Mechanical Options
None
Spool Spring Arrangement Code
C
AC/DC
DC
NFPA Size
D03
Reducer Module
N/A
Port Restrictor Plugs
None
Electrical Connection
No Connector
Coil Type Code
F
Function
3-Position Spring Centered
Response Type
Standard Response
Operation
Solenoid Operated
Pilot/Drain
None
Actuator Type
Solenoid
Seal Material
Buna-N
Spool Shift Timing
N/A
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Manual Override Option Code
H
Spool Indicator Switch Code
None
Valve Type
High-Performance
EN Code
EN21
Pilot Valve Type
N/A
Center Position
All Ports Blocked
Function Code
2
Surge Suppressor/Damper
None
Housing Code
W
Rated Flow [Max]
21 gal/min
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
