These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function Code
6
Electrical Connection
Wired Terminal Block
Indicator Lights
Yes
Solenoid
Single
Pressure [Max]
5075 psi
AC/DC
AC
Voltage & Frequency
110/120 VAC – 50/60 Hz
Design No.
60
Electrical Options
None
Function
2-Position Spring Offset, End to Center
Mechanical Options
None
Reducer Module
N/A
Operation
Solenoid Operated
Seal Material
Buna-N
Solenoid Indicator Lights Code
L
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Spool Code
6
Solenoid Energization Code
None
Pilot/Drain
None
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Coil Type Code
F
Port Restrictor Plug Code
None
Center Position
P Blocked, A & B to T
Coil Rating Code
B
Port T Code
6
Surge Suppressor/Damper Code
None
Spool Spring Arrangement Code
B
Spool Indicator Switch Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
Crossover
P Blocked, A or B to T
EN Code
None
Solenoid Code
B
Valve Type
High-Performance
Response Type
Standard Response
Electrical Connector Code
T
Housing Code
W
NFPA Size
D03
Manual Override Option Code
H
Port T Pressure Rating
3000 psi
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back