327510

Vickers D05 Solenoid Valve

Item #101941749

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Design allows for possible axial shifting of components relative to the shaft, so utilize this device where exact positioning is not critical

Specifications

Valve Type	Standard-Duty
Function	3-Position Spring Centered
Reducer Module	No
Mounting	Subplate/Manifold Mount
Solenoid Air Gap Code	None
Electrical Options	None
Voltage & Frequency	12 VDC
Cycle Rate [Max]	N/A
Port Restrictor Plugs	None
Spool Spring Arrangement Code	C
Operation	Solenoid Operated
Spool Center Condition	A Port and Double Offset sensing switch on B Port
Tank Port Rating	1000
Solenoid	Double
Temperature Range [Min]	68 °F
Pressure [Max]	3600 psi
Body Material	Gray Iron
Mechanical Options Code	None
Pilot/Drain	None
Seal Material	Buna-N
Actuator Type	Solenoid
Fluid Cleanliness	19/17/14 micron
Spool Code	8
Mechanical Options	None
Coil Rating Code	None
Port T Pressure Rating	1000 psi
Design No.	50
Coil Type	No Coil
Temperature Range [Max]	179.6 °F
Electrical Connection	Ground Terminal
Rated Flow [Max]	20 gal/min
Pressure Port Check Valve Pressure	N/A
Response Type	Standard Response
Center Position	P to T, A & B Blocked
Pilot Valve Type	N/A
Electrical Options Code	None
NFPA Size	D05
Indicator Lights	No
Leakage	Standard Performance
Crossover	All Ports Open, Restricted
Flow Direction Code	4
Model No.	DG4S4-018C-12DC-50
Overrides	No Overrides
Surge Suppressor/Damper	None
No. of Stages	Single Stage
AC/DC	DC
Weight	10.0 LB