Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Tank Port Rating | 1000 |
| Electrical Connection | Ground Terminal |
| Port T Pressure Rating | 1000 psi |
| Coil Rating Code | None |
| Coil Type | No Coil |
| Overrides | No Overrides |
| NFPA Size | D05 |
| Pressure [Max] | 3000 psi |
| Solenoid Air Gap Code | None |
| Actuator Type | Solenoid |
| Pilot/Drain | None |
| Crossover | P Blocked, A or B to T |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options | None |
| Reducer Module | N/A |
| Design No. | 50 |
| Solenoid | Single |
| Indicator Lights | Yes |
| Operation | Solenoid Operated |
| Center Position | P Blocked, A & B to T |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Spool Code | 6 |
| AC/DC | AC |
| Flow Direction Code | 4 |
| Valve Type | Standard-Duty |
| Cycle Rate [Max] | N/A |
| Function | 2-Position Spring Offset |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Port Restrictor Plugs | None |
| Pilot Valve Type | N/A |
| Model No. | DG4S4L 016A 50 |
| Rated Flow [Max] | 20 gal/min |
| Mechanical Options Code | None |
| Electrical Options Code | L |
| Response Type | Standard Response |
| Spool Spring Arrangement Code | A |
| Surge Suppressor/Damper | None |
| Weight | 10.0 LB |
