Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Actuator Type | Solenoid |
| Mounting | Subplate/Manifold Mount |
| NFPA Size | D05 |
| Leakage | Standard Performance |
| Temperature Range [Max] | 122 °F |
| Port T Pressure Rating | 1000 psi |
| Cycle Rate [Max] | N/A |
| Fluid Cleanliness | 19/17/14 micron |
| Flow Direction Code | 4 |
| Pressure Port Check Valve Pressure | N/A |
| Spool Spring Arrangement Code | C |
| AC/DC | AC |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Body Material | Gray Iron |
| Tank Port Rating | 1000 |
| Actuation Identification | Solenoid A, Solenoid B |
| Electrical Options | None |
| Coil Rating Code | None |
| Manual Override | Plain Override |
| Spool Code | 6 |
| Solenoid | Double |
| Temperature Range [Min] | 68 °F |
| Pilot/Drain | None |
| Pressure [Max] | 11500 psi |
| Operation | Solenoid Operated |
| Function | 3-Position Spring Centered |
| Port Restrictor Plugs | None |
| Valve Type | Standard-Duty |
| No. of Stages | Single Stage |
| Indicator Lights | Yes |
| Surge Suppressor/Damper | None |
| Mechanical Options | None |
| Pilot Valve Type | N/A |
| Reducer Module | N/A |
| Rated Flow [Max] | 24 gal/min |
| Coil Type | No Coil |
| Mechanical Options Code | None |
| Compatible Fluids | Petroleum Oil |
| Center Position | P Blocked, A & B to T |
| Response Type | Standard Response |
| Design No. | 50 |
| Performance | Standard Performance |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Overrides | No Overrides |
| Model No. | DG4S4W-016C-50 |
| Solenoid Air Gap Code | None |
| Seal Material | Buna-N |
| Crossover | P Blocked, A or B to T |
| Electrical Options Code | W |
| Weight | 10.0 LB |
