Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Installation | Screw-in Cartridge |
| Leakage | Standard |
| Housing Material | Aluminum |
| Valve Material | Cartridge only |
| Valve Torque into Cavity | 108 to 122 Nm |
| Series | FDC1-16 |
| Recommend Filtration Level | 18/16/13 microns |
| Flow [Min] | 12 gal/min |
| Flow [Max] | 47 gal/min |
| Seal Kit Buna | 889634 |
| Cavity | C-16-4 |
| Model No. | FDC1-16-0-44 |
| No. of Valve Ports | 4 |
| Seal Kit Viton | 889638 |
| Style | Spool |
| Body Type | 10 |
| Operation | Direct Acting |
| Temperature Range [Max] | 248 °F |
| Pressure [Max] | 3000 psi |
| Seal Material | Buna-N |
| Port Type | Cartridge Only |
| No. of Housing Ports | 4 |
| Temperature Range [Min] | -40 °F |
| Type | Flow Divider/Combiner |
| Manufacturer Part No. | FDC1-16-0-44 |
| Divider Flow | 24 gal/min |
| Weight | 0.78 LB |
