Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Coil Rating Code | None |
| Operation | Solenoid Operated |
| Port T Pressure Rating | 1000 psi |
| Electrical Options | None |
| Surge Suppressor/Damper | None |
| Response Type | Standard Response |
| Solenoid Air Gap Code | None |
| Overrides | No Overrides |
| Temperature Range [Max] | 122 °F |
| Actuator Type | Solenoid |
| Body Material | Gray Iron |
| Pressure [Max] | 12000 psi |
| Indicator Lights | No |
| Compatible Fluids | Petroleum Oil |
| Tank Port Rating | 1000 |
| Performance | Standard Performance |
| Spool Code | 6 |
| Port Restrictor Plugs | None |
| Mechanical Options Code | LH |
| AC/DC | AC |
| Actuation Identification | Solenoid B |
| Pressure Port Check Valve Pressure | N/A |
| Manual Override | Plain Override |
| Seal Material | Buna-N |
| Mechanical Options | Single Solenoid Reverse Assembly |
| No. of Stages | Single Stage |
| Electrical Connection | Ground Terminal |
| Crossover | P Blocked, A or B to T |
| Pilot/Drain | None |
| Fluid Cleanliness | 19/17/14 micron |
| Mounting | Subplate/Manifold Mount |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Coil Type | No Coil |
| Temperature Range [Min] | 68 °F |
| Pilot Valve Type | N/A |
| Spool Spring Arrangement Code | A |
| Cycle Rate [Max] | N/A |
| Valve Type | Standard-Duty |
| Model No. | DG4S4-016A-50-LH |
| Electrical Options Code | None |
| Leakage | Standard Performance |
| Flow Direction Code | 4 |
| Reducer Module | N/A |
| NFPA Size | D05 |
| Design No. | 50 |
| Rated Flow [Max] | 24 gal/min |
| Solenoid | Single |
| Center Position | P Blocked, A & B to T |
| Function | 2-Position Spring Offset |
| Weight | 10.0 LB |
