These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Operation
Solenoid Operated
Voltage & Frequency
110/120 VAC – 50/60 Hz
EN Code
None
Rated Flow [Max]
21 gal/min
Crossover
All Ports Blocked
Spool Spring Arrangement Code
AL
Coil Rating Code
B
Housing Code
W
Surge Suppressor/Damper Code
None
Center Position
All Ports Blocked
Port T Code
6
Seal Material
Buna-N
Reducer Module
N/A
Cycle Rate [Max]
N/A
Coil Type Code
F
Function Code
2
Manual Override Option Code
None
Port Restrictor Plug Code
None
Indicator Lights
No
Pressure [Max]
5075 psi
Overrides
No Overrides
Pilot/Drain
None
Mechanical Options
None
Electrical Options
None
Port Restrictor Plugs
None
Actuator Type
Solenoid
NFPA Size
D03
Design No.
60
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
Electrical Connection
No Connector
AC/DC
AC
Response Type
Standard Response
Valve Type
High-Performance
Spool Indicator Switch Code
None
Surge Suppressor/Damper
None
Solenoid Code
B
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Solenoid Energization Code
None
Function
2-Position Spring Offset, End to End
Spool Shift Timing
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back