These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Coil Rating Code
B
Manual Override Option Code
None
Solenoid Energization Code
None
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Spool Code
2
Design No.
60
Spool Shift Timing
N/A
Spool Indicator Switch Code
None
Function
3-Position Detented
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Electrical Connector Code
None
Coil Type
DIN 43650
Operation
Solenoid Operated
Seal Material
Buna-N
Coil Type Code
U
Response Type
Standard Response
Overrides
No Overrides
Electrical Options
None
Housing Code
None
Surge Suppressor/Damper Code
None
Center Position
All Ports Blocked
Spool Spring Arrangement Code
N
Pilot Valve Type
N/A
Function Code
2
Pilot/Drain
None
Crossover
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port T Code
6
Mechanical Options
None
EN Code
None
Port T Pressure Rating
3000 psi
Indicator Lights
No
NFPA Size
D03
Actuator Type
Solenoid
AC/DC
AC
Reducer Module
N/A
Surge Suppressor/Damper
None
Solenoid Code
B
Port Restrictor Plug Code
None
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
