These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
No
Valve Type
High-Performance
Coil Rating Code
A
Pressure Port Check Valve Pressure
N/A
EN Code
None
Solenoid Code
A
NFPA Size
D03
Seal Material
Buna-N
Function
3-Position Spring Centered
Pilot Valve Type
N/A
Electrical Options
None
Design No.
60
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Response Type
Standard Response
Spool Code
6
Port T Code
6
Coil Type Code
U
Mechanical Options
None
Port Restrictor Plug Code
None
Center Position
P Blocked, A & B to T
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
Overrides
No Overrides
Crossover
P Blocked, A or B to T
Operation
Solenoid Operated
Solenoid
Double
Manual Override Option Code
None
Solenoid Energization Code
V
Solenoid Indicator Lights Code
None
Pilot/Drain
None
Spool Shift Timing
N/A
Spool Spring Arrangement Code
C
AC/DC
AC
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Voltage & Frequency
110 VAC – 50 Hz
Reducer Module
N/A
Electrical Connector Code
None
Coil Type
DIN 43650
Function Code
6
Housing Code
None
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
