These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Surge Suppressor/Damper
None
Spool Code
0
Function
3-Position Spring Centered
EN Code
None
Spool Indicator Switch Code
None
Solenoid Energization Code
None
Spool Shift Timing
N/A
Solenoid Code
G
Electrical Options
None
Housing Code
None
Spool Spring Arrangement Code
C
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Indicator Lights
No
Actuator Type
Solenoid
Pilot/Drain
None
Port T Code
7
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Response Type
Standard Response
Function Code
0
Port Restrictor Plugs
None
Mechanical Options
None
Coil Rating Code
G
Seal Material
Buna-N
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Crossover
All Ports Open
Manual Override Option Code
None
Solenoid
Double
Cycle Rate [Max]
N/A
Design No.
60
Electrical Connector Code
None
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Solenoid Indicator Lights Code
None
Valve Type
High-Performance
Center Position
All Ports Open
Coil Type
DIN 43650
Voltage & Frequency
12 VDC
Operation
Solenoid Operated
Pilot Valve Type
N/A
Coil Type Code
U
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
