These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type Code
U
Spool Indicator Switch Code
None
Overrides
No Overrides
Port Restrictor Plugs
None
Pilot/Drain
None
Manual Override Option Code
H
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Spool Code
0
Solenoid
Double
Center Position
All Ports Open
Function
3-Position Spring Centered
Surge Suppressor/Damper Code
None
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Housing Code
None
Valve Type
High-Performance
Electrical Connection
DIN 43650
Mechanical Options
None
Spool Spring Arrangement Code
C
Port T Code
7
Seal Material
Buna-N
Reducer Module
N/A
EN Code
None
Pilot Valve Type
N/A
AC/DC
DC
Solenoid Energization Code
None
Crossover
All Ports Open
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Design No.
60
Port Restrictor Plug Code
None
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Indicator Lights
No
Pressure [Max]
5075 psi
Electrical Options
None
Coil Rating Code
H
Surge Suppressor/Damper
None
Voltage & Frequency
24 VDC
Function Code
0
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
NFPA Size
D03
Solenoid Code
H
Operation
Solenoid Operated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
