These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Reducer Module
N/A
NFPA Size
D03
Actuator Type
Solenoid
Electrical Connection
Wired Terminal Block
Center Position
All Ports Blocked
Coil Type Code
F
AC/DC
DC
Pilot Valve Type
N/A
Housing Code
W
Port Restrictor Plugs
None
Solenoid Code
H
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
Electrical Connector Code
T
Function Code
2
Crossover
All Ports Blocked
Port T Code
7
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
EN Code
None
Response Type
Standard Response
Spool Indicator Switch Code
None
Indicator Lights
Yes
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Valve Type
High-Performance
Seal Material
Buna-N
Spool Spring Arrangement Code
N
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
L
Function
3-Position Detented
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Solenoid Energization Code
None
Electrical Options
None
Pressure [Max]
5075 psi
Pilot/Drain
None
Spool Code
2
Overrides
No Overrides
Mechanical Options
None
Design No.
60
Coil Rating Code
H
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
