These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Multi-fluid capability without the need to change seals
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Operation
Solenoid Operated
Spool Indicator Switch Code
None
Indicator Lights
No
Spool Code
0
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Cycle Rate [Max]
N/A
Function
2-Position Spring Offset, End to Center
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper Code
None
AC/DC
AC
Electrical Connector Code
None
Solenoid Energization Code
None
Port Restrictor Plugs
None
Solenoid Code
B
Valve Type
High-Performance
Mechanical Options
None
Coil Type Code
F
Coil Rating Code
B
Manual Override Option Code
None
Port Restrictor Plug Code
None
Solenoid
Single
Crossover
All Ports Open
Port T Code
6
Spool Spring Arrangement Code
B
EN Code
None
Electrical Options
None
Pressure [Max]
5075 psi
Pilot/Drain
None
NFPA Size
D03
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Seal Material
Buna-N
Electrical Connection
No Connector
Housing Code
W
Design No.
60
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Response Type
Standard Response
Pilot Valve Type
N/A
Center Position
All Ports Open
Overrides
No Overrides
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
0
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back