These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Coil Type Code
U
Electrical Connector Code
None
Manual Override Option Code
None
NFPA Size
D03
Reducer Module
N/A
Coil Rating Code
B
Voltage & Frequency
110/120 VAC – 50/60 Hz
Indicator Lights
No
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
Solenoid Energization Code
None
Solenoid Code
B
Port Restrictor Plugs
None
Crossover
P Blocked, A or B to T
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Spool Spring Arrangement Code
C
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Function Code
66
Port T Code
6
Overrides
No Overrides
Response Type
Standard Response
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Center Position
P Blocked, A & B to T
Function
3-Position Spring Centered
Housing Code
None
Pilot/Drain
None
Spool Code
66
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Design No.
60
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Electrical Options
None
Spool Indicator Switch Code
None
AC/DC
AC
Solenoid
Double
Pilot Valve Type
N/A
EN Code
None
Mechanical Options
None
Coil Type
DIN 43650
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
