These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Manual Override Option Code
None
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
C
Coil Rating Code
G
Function
3-Position Spring Centered
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Valve Type
High-Performance
Solenoid Energization Code
None
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Port T Code
7
Indicator Lights
No
Crossover
All Ports Blocked
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Housing Code
W
Reducer Module
N/A
EN Code
None
Mechanical Options
None
Port Restrictor Plug Code
None
NFPA Size
D03
Solenoid Code
G
Response Type
Standard Response
Port Restrictor Plugs
None
Spool Indicator Switch Code
None
AC/DC
DC
Coil Type Code
F
Center Position
All Ports Blocked
Spool Shift Timing
N/A
Seal Material
Buna-N
Electrical Options
None
Voltage & Frequency
12 VDC
Solenoid
Double
Function Code
2
Electrical Connection
No Connector
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Design No.
60
Operation
Solenoid Operated
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Spool Code
2
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
