These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
DIN 43650
Surge Suppressor/Damper Code
None
Manual Override Option Code
None
Voltage & Frequency
110 VAC – 50 Hz
Port Restrictor Plugs
None
Spool Shift Timing
N/A
EN Code
None
AC/DC
AC
Spool Indicator Switch Code
None
Solenoid Code
A
Crossover
All Ports Open
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Spool Code
0
NFPA Size
D03
Valve Type
High-Performance
Function Code
0
Spool Spring Arrangement Code
C
Housing Code
None
Coil Type Code
U
Center Position
All Ports Open
Surge Suppressor/Damper
None
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Solenoid Energization Code
V
Mechanical Options
None
Overrides
No Overrides
Electrical Options
None
Pilot Valve Type
N/A
Reducer Module
N/A
Cycle Rate [Max]
N/A
Design No.
60
Port T Pressure Rating
3000 psi
Indicator Lights
No
Electrical Connector Code
None
Port Restrictor Plug Code
None
Coil Type
DIN 43650
Seal Material
Buna-N
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Port T Code
6
Coil Rating Code
A
Solenoid
Double
Pilot/Drain
None
Operation
Solenoid Operated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
