These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Response Type
Standard Response
Port Restrictor Plug Code
None
Seal Material
Buna-N
EN Code
None
Housing Code
None
Mechanical Options
None
Spool Code
0
Operation
Solenoid Operated
Design No.
60
Voltage & Frequency
24 VDC
Coil Type Code
U
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Actuator Type
Solenoid
Port T Code
7
Electrical Connection
DIN 43650
Pressure Port Check Valve Pressure
N/A
Crossover
All Ports Open
Manual Override Option Code
H
Spool Spring Arrangement Code
B
Rated Flow [Max]
21 gal/min
Pilot/Drain
None
Coil Type
DIN 43650
Function
2-Position Spring Offset, End to Center
Valve Type
High-Performance
Solenoid Energization Code
None
AC/DC
DC
Center Position
All Ports Open
Overrides
No Overrides
Solenoid Code
H
Function Code
0
Spool Indicator Switch Code
None
Coil Rating Code
H
Surge Suppressor/Damper Code
None
NFPA Size
D03
Indicator Lights
No
Electrical Options
None
Electrical Connector Code
None
Solenoid
Single
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
