These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Electrical Connector Code
T
Spool Spring Arrangement Code
C
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
L
Voltage & Frequency
110/120 VAC – 50/60 Hz
Indicator Lights
Yes
Electrical Connection
Wired Terminal Block
AC/DC
AC
Actuator Type
Solenoid
Crossover
P Blocked, A or B to T
Center Position
P Blocked, A & B to T
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Pilot/Drain
None
Spool Code
6
Solenoid Code
B
Solenoid Energization Code
V
Port T Pressure Rating
3000 psi
Function
3-Position Spring Centered
Mechanical Options
None
Pilot Valve Type
N/A
Manual Override Option Code
None
Coil Type Code
F
EN Code
None
Electrical Options
None
Pressure [Max]
5075 psi
Function Code
6
Housing Code
J
Port T Code
6
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Operation
Solenoid Operated
Surge Suppressor/Damper Code
None
Design No.
60
Pressure Port Check Valve Pressure
N/A
Overrides
No Overrides
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Seal Material
Buna-N
Reducer Module
N/A
Response Type
Standard Response
Coil Rating Code
B
Solenoid
Double
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
Surge Suppressor/Damper
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back