These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Spool Spring Arrangement Code
A
AC/DC
DC
Spool Indicator Switch Code
None
Solenoid
Single
Electrical Connector Code
None
Cycle Rate [Max]
N/A
Crossover
All Ports Blocked
Spool Code
2
Seal Material
Buna-N
Solenoid Code
H
Coil Type Code
F
Function Code
2
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to End
Solenoid Indicator Lights Code
None
Electrical Options
None
Solenoid Energization Code
None
Voltage & Frequency
24 VDC
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
EN Code
None
Electrical Connection
No Connector
Actuator Type
Solenoid
Design No.
60
Response Type
Standard Response
Center Position
All Ports Blocked
Pilot/Drain
None
NFPA Size
D03
Spool Shift Timing
N/A
Port T Code
7
Reducer Module
N/A
Surge Suppressor/Damper Code
None
Indicator Lights
No
Coil Rating Code
H
Port Restrictor Plugs
None
Manual Override Option Code
H
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
Overrides
No Overrides
Mechanical Options
None
Surge Suppressor/Damper
None
Housing Code
J
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
