These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Response Type
Standard Response
Overrides
No Overrides
Function
2-Position Spring Offset, End to End
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Solenoid Code
H
Port Restrictor Plugs
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot/Drain
None
Valve Type
High-Performance
Electrical Options
None
Manual Override Option Code
None
Operation
Solenoid Operated
Electrical Connection
Wired Terminal Block
Seal Material
Buna-N
Actuator Type
Solenoid
AC/DC
DC
NFPA Size
D03
Surge Suppressor/Damper
None
Center Position
All Ports Blocked
Spool Shift Timing
N/A
Function Code
2
Coil Rating Code
H
Voltage & Frequency
24 VDC
Solenoid
Single
Design No.
60
Coil Type Code
F
Spool Indicator Switch Code
S5
EN Code
None
Spool Spring Arrangement Code
A
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Reducer Module
N/A
Mechanical Options
None
Housing Code
W
Spool Code
2
Port T Code
2
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
L
Port T Pressure Rating
150 psi
Crossover
All Ports Blocked
Solenoid Energization Code
None
Indicator Lights
Yes
Electrical Connector Code
T
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
