These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
12 VDC
Electrical Connector Code
None
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
Center Position
P Blocked, A & B to T
Spool Shift Timing
N/A
Response Type
Standard Response
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Function
3-Position Detented
Coil Type
DIN 43650
Pressure [Max]
5075 psi
Port T Code
7
Indicator Lights
No
Design No.
60
Overrides
No Overrides
Cycle Rate [Max]
N/A
NFPA Size
D03
Port Restrictor Plugs
None
Mechanical Options
None
Port T Pressure Rating
3000 psi
Housing Code
None
Coil Type Code
U
Electrical Options
None
Spool Code
6
Coil Rating Code
G
Crossover
P Blocked, A or B to T
AC/DC
DC
Spool Spring Arrangement Code
N
Valve Type
High-Performance
Solenoid Code
G
Pilot/Drain
None
Solenoid
Double
Actuator Type
Solenoid
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Manual Override Option Code
H
Reducer Module
N/A
EN Code
None
Function Code
6
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
