Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Series | RV1-10 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Cracking Pressure [Max] | 900 psi |
| Pressure Setting | 1574 psi |
| Valve Material | Cartridge only |
| Recommend Filtration Level | 18/16/13 microns |
| Operating Pressure [Min] | 100 psi |
| Cracking Pressure [Min] | 100 psi |
| Port Size | Cartridge Only |
| Cavity | C-10-2 |
| Type | Pressure Relief Valve |
| Body Type | 1 |
| Installation | Screw-in Cartridge |
| Seal Kit Buna | 565803 |
| Adjustment Type | Knob |
| Seal Kit Viton | 566086 |
| Operating Pressure [Max] | 3046 psi |
| Seal Material | Buna-N |
| No. of Valve Ports | 2 |
| Operation | Direct Acting |
| Pressure [Max] | 3046 psi |
| Temperature Range [Max] | 248 °F |
| Manufacturer Part No. | RV1-10-K-0-9/ |
| Housing Material | Cartridge Only |
| Model No. | RV1-10-K-0-9/ |
| Port Type | Cartridge Only |
| Pilot Ratio | 100:1 |
| Flow [Max] | 8 gal/min |
| Temperature Range [Min] | -40 °F |
| Leakage | 0.25 cc/min |
| No. of Housing Ports | 2 |
| Style | Poppet |
| Weight | 0.48 LB |
