Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End To Center Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Fluid Cleanliness | 19/17/14 micron |
| Mounting | Subplate/Manifold Mount |
| Function | 2-Position Spring Centered, End To Center |
| Body Material | Gray Iron |
| Port T Pressure Rating | 1000 psi |
| Leakage | Standard Performance |
| Coil Type | ISO 4400 |
| No. of Stages | Single Stage |
| Electrical Options | None |
| Compatible Fluids | Petroleum Oil |
| Port Restrictor Plugs | None |
| Pressure [Max] | 6500 psi |
| Pilot/Drain | None |
| Mechanical Options | None |
| Response Type | Standard Response |
| Solenoid | Single |
| Temperature Range [Max] | 122 °F |
| Overrides | No Overrides |
| Operation | Solenoid Operated |
| Performance | Standard Performance |
| Crossover | All Ports Open |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Pilot Valve Type | N/A |
| Coil Type Code | U |
| Mechanical Options Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options Code | None |
| Valve Type | Standard-Duty |
| Seal Material | Buna-N |
| Temperature Range [Min] | 68 °F |
| Coil Rating Code | B |
| Rated Flow [Max] | 24 gal/min |
| Flow Direction Code | 4 |
| Design No. | 60 |
| Indicator Lights | No |
| Model No. | DG4S4-010B-U-B-60 |
| Surge Suppressor/Damper | None |
| Spool Code | 0 |
| NFPA Size | D05 |
| Actuation Identification | Solenoid B |
| Manual Override | Plain Override |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Tank Port Rating | 1000 |
| Spool Spring Arrangement Code | B |
| Electrical Connection | DIN 43650 |
| Reducer Module | N/A |
| Center Position | All Ports Open |
| Response Time | 20 to 40 ms |
| Actuator Type | Solenoid |
| Weight | 10.0 LB |
