These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Code
8
Solenoid Code
G
Electrical Options
None
Actuator Type
Solenoid
Solenoid Indicator Lights Code
None
Voltage & Frequency
12 VDC
Solenoid Energization Code
V
Solenoid
Double
Port Restrictor Plug Code
None
Coil Type
Dual 6.3 mm Spade
Surge Suppressor/Damper
None
Center Position
P to T, A & B Blocked
Port Restrictor Plugs
None
Function
3-Position Spring Centered
Pilot Valve Type
N/A
Port T Code
7
Reducer Module
N/A
Spool Indicator Switch Code
None
AC/DC
DC
Design No.
61
Electrical Connection
No Connector
Electrical Connector Code
None
Housing Code
None
Function Code
8
Coil Type Code
SP2
Crossover
All Ports Open, Restricted
Spool Shift Timing
N/A
NFPA Size
D03
Cycle Rate [Max]
N/A
Pressure [Max]
5075 psi
Response Type
Standard Response
EN Code
None
Mechanical Options
None
Manual Override Option Code
None
Pilot/Drain
None
Overrides
No Overrides
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
C
Operation
Solenoid Operated
Valve Type
High-Performance
Indicator Lights
No
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Coil Rating Code
G
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
