These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Electrical Connection
DIN 43650
Response Type
Standard Response
Solenoid
Double
Solenoid Energization Code
None
Pilot/Drain
None
Pressure [Max]
5075 psi
Spool Code
2
Coil Type Code
U
Port Restrictor Plug Code
None
Voltage & Frequency
24 VDC
Overrides
No Overrides
Coil Type
DIN 43650
Spool Spring Arrangement Code
C
Coil Rating Code
H
Design No.
60
Function Code
2
Valve Type
High-Performance
Solenoid Code
H
Center Position
All Ports Blocked
Manual Override Option Code
Z
NFPA Size
D03
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Port T Pressure Rating
3000 psi
Solenoid Indicator Lights Code
None
Housing Code
None
AC/DC
DC
Function
3-Position Spring Centered
Port T Code
7
Port Restrictor Plugs
None
Seal Material
Buna-N
Crossover
All Ports Blocked
Operation
Solenoid Operated
Electrical Options
None
Indicator Lights
No
Reducer Module
N/A
Spool Shift Timing
N/A
Electrical Connector Code
None
Spool Indicator Switch Code
None
Surge Suppressor/Damper
None
Actuator Type
Solenoid
EN Code
None
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
