These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Blocked
Rated Flow [Max]
21 gal/min
Seal Material
Buna-N
Electrical Connector Code
T
Solenoid
Double
Pilot/Drain
None
Operation
Solenoid Operated
Reducer Module
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Solenoid Indicator Lights Code
None
Function Code
2
AC/DC
AC
Function
3-Position Spring Centered
Design No.
60
Electrical Options
None
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Manual Override Option Code
None
Solenoid Energization Code
None
Electrical Connection
Wired Terminal Block
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Solenoid Code
BL
Coil Rating Code
BL
Valve Type
High-Performance
Response Type
Standard Response
EN Code
None
Housing Code
W
Port T Code
6
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Overrides
No Overrides
Crossover
All Ports Blocked
NFPA Size
D03
Spool Code
2
Surge Suppressor/Damper Code
None
Indicator Lights
No
Port T Pressure Rating
3000 psi
Cycle Rate [Max]
N/A
Mechanical Options
None
Coil Type Code
F
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back