These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
None
Port Restrictor Plugs
None
Mechanical Options
None
Surge Suppressor/Damper
None
Port Restrictor Plug Code
None
Valve Type
High-Performance
Manual Override Option Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Electrical Connector Code
PA5
Solenoid
Double
Overrides
No Overrides
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
AC/DC
DC
Solenoid Code
H
Solenoid Indicator Lights Code
L
Crossover
All Ports Open
Spool Shift Timing
N/A
Spool Code
0
Voltage & Frequency
24 VDC
Coil Rating Code
H
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Port T Code
7
NFPA Size
D03
Center Position
All Ports Open
Coil Type Code
F
EN Code
None
Electrical Connection
Five Pin Connector
Design No.
60
Response Type
Standard Response
Housing Code
W
Electrical Options
None
Pressure [Max]
5075 psi
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper Code
None
Actuator Type
Solenoid
Spool Spring Arrangement Code
C
Indicator Lights
Yes
Seal Material
Buna-N
Pilot/Drain
None
Function Code
0
Function
3-Position Spring Centered
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
