These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
Function Code
6
Rated Flow [Max]
21 gal/min
Electrical Connection
No Connector
Housing Code
None
Manual Override Option Code
None
NFPA Size
D03
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
EN Code
None
Spool Spring Arrangement Code
C
Coil Rating Code
G
Spool Code
6
Solenoid Indicator Lights Code
None
Solenoid
Double
AC/DC
DC
Solenoid Energization Code
None
Port Restrictor Plugs
None
Mechanical Options
None
Electrical Options
None
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Solenoid Code
G
Voltage & Frequency
12 VDC
Indicator Lights
No
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Function
3-Position Spring Centered
Seal Material
Buna-N
Pilot Valve Type
N/A
Port T Code
7
Spool Indicator Switch Code
None
Overrides
No Overrides
Crossover
P Blocked, A or B to T
Design No.
60
Surge Suppressor/Damper
None
Coil Type Code
KU
Coil Type
Top Exit Flying Leads
Pilot/Drain
None
Spool Shift Timing
N/A
Response Type
Standard Response
Port Restrictor Plug Code
None
Center Position
P Blocked, A & B to T
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
