Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Function | 3-Position Spring Centered |
| Actuator Type | Solenoid |
| Pressure [Max] | 3000 psi |
| Coil Type | No Coil |
| Design No. | 50 |
| Flow Direction Code | 4 |
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Seal Material | Buna-N |
| Spool Code | 6 |
| Solenoid Air Gap Code | None |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| Indicator Lights | No |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Overrides | No Overrides |
| Electrical Options Code | None |
| Surge Suppressor/Damper | None |
| Electrical Connection | Ground Terminal |
| Coil Rating Code | None |
| Rated Flow [Max] | 20 gal/min |
| Port Restrictor Plugs | None |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options | None |
| Pilot Valve Type | N/A |
| Crossover | P Blocked, A or B to T |
| Center Position | P Blocked, A & B to T |
| Valve Type | Standard-Duty |
| Mechanical Options | None |
| Reducer Module | N/A |
| AC/DC | AC |
| Operation | Solenoid Operated |
| Solenoid | Double |
| Spool Spring Arrangement Code | C |
| Weight | 10.0 LB |
