Find a Service Center
- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Design No. | 50 |
| Port Restrictor Plugs | None |
| Crossover | All Ports Blocked |
| Operation | Solenoid Operated |
| Electrical Connection | Ground Terminal |
| Pressure [Max] | 3000 psi |
| Pressure Port Check Valve Pressure | N/A |
| Seal Material | Buna-N |
| Indicator Lights | No |
| Valve Type | Standard-Duty |
| Center Position | All Ports Blocked |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| Response Type | Standard Response |
| AC/DC | DC |
| Voltage & Frequency | 48 VDC |
| Rated Flow [Max] | 20 gal/min |
| Spool Spring Arrangement Code | A |
| Function | 2-Position Spring Offset |
| Pilot Valve Type | N/A |
| Electrical Options Code | None |
| Electrical Options | None |
| Spool Code | 2 |
| Solenoid | Single |
| Overrides | No Overrides |
| Mechanical Options Code | None |
| Actuator Type | Solenoid |
| Reducer Module | N/A |
| Surge Suppressor/Damper | None |
| Solenoid Air Gap Code | None |
| Coil Type | No Coil |
| Port T Pressure Rating | 1000 psi |
| Flow Direction Code | 4 |
| Mechanical Options | None |
| Coil Rating Code | None |
| NFPA Size | D05 |
| Weight | 10.0 LB |
