Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Series | FDC1-16 |
| Port Type | Cartridge Only |
| Housing Material | Aluminum |
| No. of Valve Ports | 4 |
| Seal Material | Buna-N |
| Manufacturer Part No. | FDC1-16-0-44 |
| Temperature Range [Min] | -40 °F |
| Seal Kit Buna | 889634 |
| Model No. | FDC1-16-0-44 |
| No. of Housing Ports | 4 |
| Flow [Max] | 47 gal/min |
| Installation | Screw-in Cartridge |
| Cavity | C-16-4 |
| Leakage | Standard |
| Temperature Range [Max] | 248 °F |
| Recommend Filtration Level | 18/16/13 microns |
| Operation | Direct Acting |
| Type | Flow Divider/Combiner |
| Divider Flow | 24 gal/min |
| Seal Kit Viton | 889638 |
| Valve Material | Cartridge only |
| Pressure [Max] | 3000 psi |
| Body Type | 10 |
| Style | Spool |
| Valve Torque into Cavity | 108 to 122 Nm |
| Flow [Min] | 12 gal/min |
| Weight | 0.78 LB |
