
- Solenoid Valve
- 4-Way, 2-Position Valve Type
- Cartridge Only Port Type
- Direct Acting Actuation
- Spool
description
- Four-way, two-position, direct-acting, spool-type, screw-in cartridge solenoid valve. In the de-energized position, flow is allowed between port 1 and port 4 while port 2 and port 3 are blocked. In the energized position port 3 is open to port 4 and port 2 is open to port 1.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Valve Material | Cartridge only |
Port Type | Cartridge Only |
No. of Housing Ports | 2 |
Operation | Solenoid Operated |
Seal Kit Viton | 566080 |
Flow [Max] | 6 gal/min |
Bi-Directional (2-Way Valves) | No |
Actuation | Direct Acting |
No. of Valve Ports | 2 |
Coil Series | Use J Series, 23 W |
Installation | Screw-in Cartridge |
Model No. | SV4-10-4-0-24DG |
Manual Override | No Manual Override |
Watt Rating | 23 W |
Pressure [Max] | 3000 psi |
Filter Option | None |
Recommend Filtration Level | 18/16/13 microns |
Valve Type | 4-Way, 2-Position |
Housing No. | N/A |
Series | J Series |
Valve Voltage Rating | 24 VDC |
Cavity | C-10-4 |
Seal Kit Buna | 889625 |
Size Designation | 10 |
Connector Type | DIN 43650-A |
Poppet/Spool | Spool |
Valve Torque into Cavity | 47 to 54 Nm |
Cartridge Valve Series | SV4-10-4 |
Seal Material | Buna-N |
Housing Material | Aluminum |
Temperature Range [Min] | -40 °F |
Temperature Range [Max] | 248 °F |
Weight | 0.0 LB |
