Find a Service Center
- D03 Dual Relief Valve
- Pressure Limited in Port A
- Drained into Port B
- 43.5-1,450 psi
- Screw w/Locknut Adjustment
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
| Operating Pressure [Max] | 4500 psi |
| Adjustment Type, Dual | Screw w/Locknut |
| Pressure Limited In, Dual | Port B |
| Relief Function | Dual |
| Design No. | 41 |
| Port Drained Into, Dual | Port A |
| Flow [Max] | 16 gal/min |
| Gage Port | None |
| Remote Control Port | No |
| Pressure Adjustment Range, Dual (psi) | 43.5-1,450 |
| External Drain | No |
| Pressure Adjustment Range (psi) | 43.5 to 1,450 |
| Adjustment Type | Screw w/ Locknut |
| Pressure Limited In | Port A |
| Model No. | DGMC2-3-AB-BW-BA-BW-41 |
| Interface | D03 |
| Valve Type | Dual (Cross Port) Relief Valve "A" to "B" & "B" to "A" |
| Port Drained Into | Port B |
| Family Name | Vickers D03 SystemStak™ Valves |
| Manufacturer Part No. | DGMC2-3-AB-BW-BA-BW-41 |
| External Drain, Dual | No |
| Weight | 3.3 LB |
