Find a Service Center
- 1/5" Pitch
- XL Belt Size
- 3/8" or 1/4" Belt Width
- 20 Teeth
- 1.273" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Pitch Diameter | 1.273 in |
| Bushing Series | N/A |
| Belt Size | XL |
| Hub Projection | 0.35 in |
| No. of Teeth | 20 |
| Finished Bore | N/A |
| Bore Type | Reborable |
| Belt Pitch | 0.2 in |
| Length Through Bore | 0.88 in |
| Hub Dia. | 0.94 in |
| Belt Width | 0.375 in, 0.25 in |
| Bore Range [Min] | 0.25 in |
| Type | DF-1 |
| Bushing Type | None |
| Bore Range [Max] | 0.5625 in |
| Weight | 0.27 LB |
| EAN or UPC | 782475087778 |
| NSN Number | 3020-01-011-9440 |
