Find a Service Center
- 1/2" Pitch
- H Belt Size
- 1 1/2" Belt Width
- 26 Teeth
- 4.138" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| No. of Teeth | 26 |
| Bore Range [Min] | 0.75 in |
| Outside Dia. | 4.084 in |
| Bushing Series | N/A |
| Bore Type | Reborable |
| Length Through Bore | 2.75 in |
| Belt Pitch | 0.5 in |
| Hub Dia. | 3.38 in |
| Hub Projection | 1 in |
| Belt Width | 1.5 in |
| Pitch Diameter | 4.138 in |
| Belt Size | H |
| Bore Range [Max] | 2.25 in |
| Bushing Type | None |
| Finished Bore | N/A |
| Type | DF-1 |
| Weight | 8.62 LB |
| EAN or UPC | 782475421749 |
